The air conditioning system is approximately 12% of the annual utility expense of the house. It increased by 70% during the sweltering summer season. You can reduce the utility bills and increase the efficiency of your AC by following the right tips and tricks. Here, in this article, we are going to describe various ways to increase the efficiency of the air conditioning system:
Unplug Your Vents
The best way to enhance the efficiency of your AC is to keep the vents clean and unplugged. You should regularly check the vents and make sure that they are unplugged and clean. You should perform the following test while evaluating your AC:
- Determine the size of the air filter if there is any inside the vent.
- Whether the vents look dirty due to dust, debris, and other things.
- Do you remember when you last cleaned the vents?
You should keep the vents or ducts clean. If you do not have any idea or experience in this field, then you should call the professionals such as ducted air conditioning Sydney contractors. It is very important if you want to keep the continuous airflow through the AC system. You should make sure that all the vents are clean and clear.
Keep Doors and Windows Closed
The cool air through the air conditioner may escape your home easily if you have left the doors and windows of the house open. It may lead to inefficiency in the cooling efficiency of your AC. If you want to keep your office cool without increasing the utility bills, then keep your windows and doors closed.
Keep Space Around Condenser Clear
The outdoor unit will work efficiently only when it is properly clean and free from debris. But cleaning the condenser unit is very tricky, you should ensure that you know the right steps to perform it. Otherwise, you should take the help of professionals to do it. They will use the right methods while cleaning the condenser unit and make sure that there will be no damage.
Keep Heat Producing Things Away
The thermostat of the ducted air conditioner should be away from the heat-producing elements. If you have installed a thermostat near a heated appliance, then it will send the signal that the indoor ambiance is warned and more cooling is required to keep the place cool and comfortable. It means that the thermostat would not be able to determine the indoor temperature of the home properly. The certified technicians know all these kinds of important details. Thus, you should hire professionals only like air conditioning Sydney contractors for the installation of the ducted AC at your home.
Fix Any Leaks
Air leakage can also lead to reduced efficiency of your air conditioning system. If any kind of leakage is present in your house, then you should immediately fix it. Otherwise, this leakage would be responsible for passing the cool air from your house. Thus, you should check the attic and windows of your home and make sure that these are properly insulated.
You can also call the professionals to thoroughly inspect the insulation of your house and ensure that there is no leakage. Air leakage led to the loss of efficiency and increased unnecessary utility bills. It is so because you have to run the air conditioner longer than usual. It is another big issue that can lead to the high energy cost.
Increase the Thermostat’s Temperature
You should raise the temperature a little bit to increase the efficiency of your AC. Just doing the adjustments in the temperature by just 5 to 8 degrees would help to save money on energy bills. We recommend you invest in the programmable thermostat to automatically adjust the temperature of your device. You can easily make adjustments to the thermostat, even when you are far away.
Cover Your Windows
You should keep your windows covered with blinds or blackout curtains for the whole day. It means that the temperature inside your home would not reach an extremely high level. Consequently, you do not have to keep your AC running throughout the day. It is recommended to keep your curtains closed before leaving your home so that the temperature does not rise extremely inside your home.
Shade Your Outside Condenser
It is an undeniable fact that the sun can be very brutal. Thus, high temperatures can lead to a significant impact on the outdoor unit of the AC. If you want to reduce the wear and tear of your outdoor unit, then keep your outdoor unit in a cool and shaded area. But make sure that the condenser unit is in a shaded area where there is no obstruction in airflow.